Speakers


 Model Number / DescriptionPrice
PR(R) 10
Item #: 00583890

The PR(R) series delivers superior sound quality by utilizing advanced materials, like its lightweight, roadworthy molded polypropylene exterior. The PR(R) 10 is a two-way speaker system that is lightweight yet rugged for live music or speech applications and will handle 400 watts program and 800 watts peak. It utilizes a heavy-duty 10 inch woofer with a 2 inch voice coil and a RX14(TM) 1.4 inch titanium diaphragm compression driver coupled to a constant directivity horn. Its durable injection molded enclosure features a black powder-coated steel grille that provides driver protection and a professional appearance. This system can be used on the floor, be pole mounted or flown via top and bottom flying s. Connections are made via two 1/4 inch phone jack connected in parallel to accommodate daisy-chaining. Now with light weight Neodymium woofer.



Features:
  • Two-way sound reinforcement enclosure
  • 400 Watts program, 800 watts peak
  • Frequency Range: 54 Hz to 21 kHz
  • One 10" woofer with 2.375" VC and lightweight neodymium magnet
  • RX14(TM) compression driver with 1.4 inch titanium diaphragm 1 inch exit
  • 90 x 40 constant directivity horn
  • Tweeter protection
  • Heavy-duty crossover
  • Lightweight molded polypropylene enclosure
  • Molded-in pole mount system
  • Heavy-duty metal grille
  • Weight Unpacked: 20
  • Width Unpacked: 14
  • Depth Unpacked: 13.375
  • Height Unpacked: 19
  • Weight Packed: 24.5
  • Width Packed: 16.875
  • Depth Packed: 15.5
  • Height Packed: 20.25
  • $175.00 CDN

    Add to Cart
    PR(R) 12
    Item #: 00583900

    The PR(R) series delivers superior sound quality by utilizing advanced materials, like its lightweight, roadworthy molded polypropylene exterior. The PR(R) 12 is a two-way speaker system that is lightweight yet rugged for live music or speech applications and will handle 400 watts program and 800 watts peak. It utilizes a heavy-duty 12 inch woofer with a 2 3/8 inch voice coil and a RX14(TM) 1.4 inch titanium diaphragm compression driver coupled to a constant directivity horn. Its durable injection molded enclosure features a black powder-coated steel grille that provides driver protection and a professional appearance. This system can be used on the floor, be pole mounted or flown via top and bottom flying s. Connections are made via two 1/4 inch phone jack connected in parallel to accommodate daisy-chaining. Now with light weight Neodymium woofer.

    Features:
  • 2-way sound reinforcement enclosure
  • 400 watts program, 800 watts peak
  • One 12 inch premium, 2 3/8 inch voice coil woofer
  • RX14(TM) compression driver with 1.4 inch titanium diaphragm 1 inch exit
  • 90 x 40 degree constant directivity horn
  • Tweeter protection
  • Heavy-duty crossover
  • Lightweight molded polypropylene enclosure
  • Molded-in pole mounts system
  • Heavy-duty metal grille
  • Weight Unpacked: 24.5
  • Width Unpacked: 18.25
  • Depth Unpacked: 14.5
  • Height Unpacked: 24
  • Weight Packed: 31.5
  • Width Packed: 20.75
  • Depth Packed: 16.5
  • Height Packed: 24.5
  • $199.99 CDN

    Add to Cart
    PR(R) 15
    Item #: 00583910

    The PR(R) series delivers superior sound quality by utilizing advanced materials, like its lightweight, roadworthy molded polypropylene exterior. The PR(R) 15 is a two-way speaker system that is lightweight yet rugged for live music or speech applications and will handle 400 watts program and 800 watts peak. It utilizes a heavy-duty 15 inch woofer with a 2 3/8 inch voice coil and a RX14(TM) 1.4 inch titanium diaphragm compression driver coupled to a constant directivity horn. Its durable injection molded enclosure features a black powder-coated steel grille that provides driver protection and a professional appearance. This system can be used on the floor, be pole mounted or flown via top and bottom flying s. Connections are made via two 1/4 inch phone jack connected in parallel to accommodate daisy-chaining. Now with light weight Neodymium woofer.

    Features:
  • Two-way sound reinforcement enclosure
  • 400 watts program, 800 watts peak
  • One 15" woofer with 2.375" VC and lightweight neodymium magnet
  • RX14(TM) compression driver with a 1.4 inch titanium diaphragm 1 inch exit
  • 90 x 40 degree constant directivity horn
  • Tweeter protection
  • Heavy-duty crossover
  • Lightweight molded polypropylene enclosure
  • Molded-in pole mounts system
  • Heavy-duty metal grille
  • Weight Unpacked: 32
  • Width Unpacked: 22
  • Depth Unpacked: 17.125
  • Height Unpacked: 29
  • Weight Packed: 40
  • Width Packed: 24.375
  • Depth Packed: 19.375
  • Height Packed: 29.75
  • $259.99 CDN

    Add to Cart
    Impulse(R) 100 Two-Way Molded PA Enclosure (Black)
    Item #: 00360460

    Ultra-high performance from a portable, two-way, full-range speaker system in a compact package. This cosmetically elegant and durable trapezoidal enclosure is made of high-impact polypropylene with a metal grille. The system is comprised of a 10 inch long-throw, heavy-duty woofer with a special suspension to provide excellent excursion capability. A 14XT(TM) compression driver with a 1.4 inch titanium diaphragm is coupled to an extremely smooth constant directivity horn with Sound Guard(TM) II high frequency driver protection. Input connections are made via two 1/4 inch phone jacks connected in parallel for daisy-chaining. The Impulse(R) 100 provides extremely smooth frequency response and clarity in the midrange that is superlative. The cabinet features a handle, molded-in speaker stand adapter in addition to top and bottom mounting points for flying.

    Features:
  • Two-way weather resistant molded speaker system
  • High-frequency driver coupled with a molded-in horn and a specially-designed, long-throw, heavy duty woofer
  • On-board Sound Guard(TM) II high-frequency driver protection circuit
  • Molded-in stand adapter and flying points on the top and bottom
  • Molded-in handle
  • Available in black or white
  • Weight Unpacked: 30
  • Width Unpacked: 14
  • Depth Unpacked: 13.375
  • Height Unpacked: 19.375
  • Weight Packed: 33
  • Width Packed: 16.25
  • Depth Packed: 15.25
  • Height Packed: 21.675
  • $299.99 CDN

    Add to Cart
    PR(R) 10P Class H Rail Switching Technology
    Item #: 00584060

    The PR(R) 10P is small and lightweight enough to put just about anywhere yet powerful enough to take on a crowd. This powered speaker has 270 watts of bi-amped power with 200 watts feeding the premium 10 inch woofer and 70 watts powering the 1.4 inch driver for highs. Both amplifiers feature DDT(TM) compression, which virtually eliminates audible power amplifier clipping. The 3-channel built-in mixer makes the PR(R) 10P perfect for use as small PA and will deliver plenty of sound even outdoors. Made of high-impact polypropylene, the molded handles and built-in stand mounts make moving or installing a breeze. Try the PR(R) 10P out and you'll be amazed with its sound. Now with light weight Neodymium woofer.

    Features:
  • Bi-amplified powered system with 270 watts maximum output
  • Both power amps have DDT(TM) compression
  • 10" woofer with 2.375" VC and lightweight neodymium magnet
  • RX(TM)14 1.4 inch titanium compression driver
  • Peak SPL up to 119 dB with music
  • Combo jack with 1/4 inch TRS and Female XLR mic or line-level balanced input
  • Two 1/4 inch phone jack inputs with concentric level controls
  • Input mixing built-in
  • Molded-in horn has exceptionally smooth response and pattern control
  • Top handgrip and pole mount molded-in
  • Top and bottom flying point s
  • Weight Unpacked: 29.5
  • Width Unpacked: 14
  • Depth Unpacked: 13.375
  • Height Unpacked: 19
  • Weight Packed: 35
  • Width Packed: 17
  • Depth Packed: 15.5
  • Height Packed: 20.5
  • $349.99 CDN

    Add to Cart
    PR(R) 12PD Class D Rail Switching Technology
    Item #: 00586610

    The Peavey PR 12D is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PR 12D is capable of up to 120 dB peak SPL. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system. This two-way powered system is comprised of a 150 W class D power amplifier driving a 12" heavy duty woofer. The RX™14 compression driver is driven by a 50 W class D power amplifier and features a 1.4” titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90° by 40°) that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4” TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4” phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. Constant Loudness (Fletcher-Munson) circuit for accenuating bass and treble at low listening volume levels. The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were ed for their reliability and superb musical performance capability. Both amplifiers feature our patented DDT™ compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount™ allow maximum utility.

    Features:
  • Bi-amplified powered system with 200 watts maximum output
  • Both power amps have DDT(TM) compression
  • One 12" neodymium, 2.375" voice coil woofer
  • Woofer servo
  • RX(TM) 14 1.4" titanium compression driver
  • Automatic equal loudness (Fletcher-Munson) compensation
  • Combo jack with 1/4" TRS & female XLR mic or line-level balanced input
  • Two 1/4" phone jack inputs for link-out/ link-in capability
  • Molded-in horn has exceptionally smooth response & pattern control
  • Top & side handgrips
  • Pole mount molded-in
  • Top & bottom flyng point s
  • $449.99 CDN

    Add to Cart
    Impulse(R) 1012 8 ohm Two-Way Molded PA Enclosure (Black)
    Item #: 00442530

    Ultra-high performance from a weather-resistant, two-way (full-range or bi-ampable) speaker system that will provide up to 133 dB SPL. This system provides high power handling capability while maintaining a smooth, yet clear response. The elegant and durable trapezoidal enclosure is made of high-impact polypropylene with a metal grille. This system is comprised of a 12 inch Black Widow(R) woofer with a Kevlar(R) impregnated cone (with a specially treated surround) and a RX(TM) 22 two inch titanium compression driver coupled to a constant directivity horn with Sound Guard(TM) high frequency driver protection. Connections are made via two parallel 1/4 inch phone jacks for daisy-chaining and a switchable 4-pin Neutrik(R) Speakon(R) connector. This system will provide up to 133 dB SPL and can be used on the floor, speaker stand or be flown via top and bottom flying points.

    Features:
  • 1000 watt, 2-way weather resistant enclosure with molded-in stand adapter and flying points on the top and bottom
  • One 12 inch Black Widow(R) woofer (1208-8 SPS BWX)
  • RX(TM) 22 compression driver coupled with a molded-in 90 degree x 45 degree constant directivity horn
  • Sound Guard(TM) high frequency driver protection circuit
  • Available in black and white
  • Response: 72 Hz to 18 kHz
  • Sensitivity: 99 dB (1W at 1m)
  • Impedance: 8 ohms
  • Black version also available in 4 ohms
  • Weight Unpacked: 44.58
  • Width Unpacked: 18
  • Depth Unpacked: 14.25
  • Height Unpacked: 24.25
  • Weight Packed: 50
  • Width Packed: 21.25
  • Depth Packed: 17.375
  • Height Packed: 27.25
  • $519.99 CDN

    Add to Cart
    PR 15D
    Item #: 03586620

    The PR 15D features a bi-amped power section that provides 150 watts power for the woofer and 50 watts power for the compression driver tweeter, both with Peavey-exclusive DDT™ compression. Featuring a 15” heavy duty woofer and the RX™14 compression driver, the PR 15D provides an XLR and 1/4”phone combo jack, with mic/line switchable level, balanced input with volume control.

    Features:
  • Bi-amplified Class D powered system with 200 watt total power
  • Both power amps have DDT compression
  • 15" heavy duty woofer with 2.375" voice coil and Neodymium Magnet
  • Woofer servo for reduced woofer distortion
  • Automatic equal loudness (Fletcher-Munson)
  • RX 14 1.4" titanium compression driver
  • Peak SPL up to 120 dB with music!
  • Combo jack with 1/4" TRS & female XLR mic- or line-level balanced input
  • Two 1/4" phone jacks for link-out/direct-in capability
  • Molded-in horn with exceptionally smooth response and pattern control
  • Top and sides handgrips
  • Pole mount molded-in
  • Reduced weight
  • Top and bottom flying points
  • $539.99 CDN

    Add to Cart
    Impulse(R) 100P Powered Two-Way Molded PA Enclosure
    Item #: 00459680

    Ultra-high performance from a powered, portable, two-way, full-range speaker system in a compact package that will provide up to 120 dB SPL. This elegant and durable trapezoidal enclosure is made of high-impact polypropylene with a metal grille. The system is comprised of a 10 inch long-throw, heavy duty woofer with a special suspension to provide excellent excursion capability. A 14XT(TM) compression driver with a 1.4 inch titanium diaphragm is coupled to an extremely smooth constant directivity horn. DDT(TM) prevents internal power amps from clipping. Input/output connections are made via 1/4 inch phone jacks and/or XLR-3 connectors. Multiple 100P enclosures can be connected together and controlled from a single 100P rear panel volume control. The cabinet features a handle, in addition to top and bottom mounting points for flying.

    Features:
  • Bi-amplified powered system with 200 watts total power
  • Both power amps have DDT(TM) compression
  • 10 inch premium heavy duty long throw woofer
  • 14XT(TM) 1.4 inch titanium compression driver
  • Peak SPL In excess of 120 dB with music
  • 1/4 inch TRS & M/F XLR line-level balanced inputs
  • Molded-in horn has exceptionally smooth response and pattern control
  • Loop Out/In jacks allow link-up of multiple units
  • Top handgrip
  • Cover available
  • Weight Unpacked: 36.3
  • Width Unpacked: 14
  • Depth Unpacked: 13
  • Height Unpacked: 19
  • Weight Packed: 40
  • Width Packed: 16.25
  • Depth Packed: 15.25
  • Height Packed: 21.75
  • $569.99 CDN

    Add to Cart
    Impulse(R) 1015 8 Ohm Two-Way Molded PA Enclosure (Black)
    Item #: 00442590

    Ultra-high performance from a weather-resistant, two-way (full-range or bi-ampable) speaker system that will provide up to 133 dB SPL. This system provides high power handling capability while maintaining a smooth, yet clear response. The elegant and durable trapezoidal enclosure is made of high-impact polypropylene with a metal grille. This system is comprised of a 15 inch Black Widow(R) woofer with a Kevlar(R) impregnated cone (with a specially treated surround) and a RX(TM) 22 two inch titanium compression driver coupled to a constant directivity horn with Sound Guard(TM) high frequency driver protection. Connections are made via two parallel 1/4 inch phone jacks for daisy-chaining and a switchable 4-pin Neutrik(R) Speakon(R) connector. This system will provide up to 133 dB SPL and can be used on the floor, speaker stand or be flown via top and bottom flying points.

    Features:
  • 2-way weather resistant enclosure with molded-in stand adapter and flying points on the top and bottom
  • 1000 Watts program
  • 2000 Watts peak
  • One 15 inch Black Widow(R) woofer (1508-8 SPS BWX)
  • RX(TM) 22 compression driver coupled with a molded-in 90 degree x 45 degree constant directivity horn
  • Sound Guard(TM) high frequency driver protection circuit
  • Available in black and white
  • Response: 60 Hz to 18 kHz, +/- 3 dB
  • Sensitivity: 100 dB SPL at 1W/1m
  • Black available in 8 Ohms
  • Cover available
  • Width Unpacked: 21.25
  • Depth Unpacked: 17.25
  • Height Unpacked: 29
  • Weight Packed: 62
  • Width Packed: 24.375
  • Depth Packed: 20.125
  • Height Packed: 32.25
  • $599.99 CDN

    Add to Cart
    Can't find something you are looking for?
    Contact Us
    We may have it in our store or it could be a special order.
      Monday to Saturday 10:00 - 6:00
    Closed Sunday
    We are now at 5720 - 3 Street SW
    Nov. 11, 2014 open Noon - 6pm
    5720 MacLeod Trail S.W.
    Calgary, AB, Canada
    T2H 0J6
    1.800.203.3331
    Copyright © 2008-2017 Karaoke World. All Rights Reserved

    Site Map Shipping Policy Return Policy Terms of Use Privacy Statement

    Maintianed by La Maison Productions Hosting by Chinook Webs